Tyre pressure, tread and ageHow to check your tyres' pressure, tread and age
- 5minutes
- 7steps
- 3needed
All steps
Step 1 of 7: Find the right pressure
Look on the sticker inside the driver's door frame or fuel flap, or in the manual. There's often one figure for a normal load and one for a full load.
Step 2 of 7: Check the tyres cold
Measure before driving, or after the car has stood for a few hours. Warm tyres read higher than they really are.
Step 3 of 7: Measure each tyre
Unscrew the valve cap, press the gauge firmly onto the valve and read it. Check the spare too if it's a full-size wheel.
Step 4 of 7: Add or let out air
Add air in short bursts and measure again. To let air out, press the pin in the middle of the valve briefly. Screw the caps back on.
Step 5 of 7: Measure the tread
The legal minimum in the EU and UK is 1.6 mm, but grip drops sharply below 3 mm; plan to replace them then. Tread level with the wear bars in the grooves means replace now.
Step 6 of 7: Look for damage
Turn the steering to full lock and look around each tyre for cuts, bulges, cracks or nails.
Warning: A bulge in the sidewall means the tyre can burst. Replace it before driving any distance.
Step 7 of 7: Read the tyre's age
Find the four-digit code on the sidewall; 2319 means week 23 of 2019. Have tyres over 5 years old checked yearly, and replace them at 10 years, whatever the tread.
Tread Head
Tap the steps in the right order with no mistakes to earn this title and finish the skill.
Start the drillYour levels for this skill