A pipe burstsWhat to do if a water pipe bursts at home
- 3minutes
- 5steps
You won't have time to read this when it happens. Learn the order now.
All steps
Step 1 of 5: Shut the main water valve
Usually where the pipe enters your home: under the kitchen sink, by the water meter, or in the service shaft. Wheel: turn clockwise until it stops. Lever: a quarter turn, so it sits across the pipe.
Step 2 of 5: Power off if water is near electrics
At the fuse box, and only with dry hands on a dry floor. If you can't reach it safely, stay away and call an electrician.
Step 3 of 5: Open the cold taps
This drains what's left in the pipes. Switch off the boiler or water heater too.
Step 4 of 5: Catch and contain
Use buckets and towels. If a ceiling is bulging with water, keep out from under it.
Step 5 of 5: Call for help
Call a plumber. In a flat, also warn the neighbours below and the building administrator. Take photos for the insurer.
Never
- Touch wet switches, sockets or appliances.
Do this today
Find your main water valve and check that it turns. A seized valve is useless in an emergency.
Valve Hunter
Tap the steps in the right order with no mistakes to earn this title and finish the skill.
Start the drillYour levels for this skill